Catalog

Open a project. Make it yours. Print it.

Projects

Press-fit lid, hidden magnet.

44 × 37 × 13 mm

Built around the board. Lid included.

93 × 64 × 32 mm

Pens, bits, phone, cables. One print.

120 × 80 × 33 mm

Three 608 bearings, press-fit.

90 × 30 × 7 mm

Fuselage with servos, battery and motor in place.

130 × 390 × 117 mm

Ready-made parts you set by size. Insert them into any project.

Plate with hole
- Size
- Hole shape
- Screw / nut
- Custom diameter / wrench size
9 g servo mount (SG90)
- Plate thickness
22xx motor mount (16×19)
- Plate thickness
LE2204 motor mount (X mount 31.5)
- Plate thickness
Nut trap
- Size
- Screw
608 bearing seat
- Outer diameter / side
- Height
- Outer shape
- Fit
- Shoulder under the outer race
Cell holder (18650 / 21700 / 14500)
- Cell
- Wall
- Base (cable tie tunnel)
- Cable tie slot width
- Extra length
FC stack plate
- Hole pattern
- Screw
- Plate thickness
- Margin around a hole
FPV camera mount (micro 19 mm)
- Camera width (micro 19, nano 14)
- Pivot height above the base
- Cheek width
- Cheek thickness
- Base thickness
N20 motor clamp
- Body diameter (N20: 12 mm)
- Clearance per side
- Wall
- Clamp length
- Tab width
- Tab thickness
- Screw